DIY Ring Flash with an Old Strobe and a Plastic Container
One of the things about macrophotography is that you either have to shoot wide open (and have a depth of field of about 1 micron or so) or stopped down to get some decent DOF (but have ridiculous shutter speeds making everything a blur). The solution: put a strobe on it! Given that you are so close to your subject, it’s hard to properly light it. A ring flash is a good choice and at the tiny distance it is used from the subject, it has the effect of a large softbox creating even lighting.
On the right you see the ring of my ring flash. On the left is an original bucket the ring was made from. It originally contained food (the stuff they smear on sandwiches) and you can probably find similar buckets in you local sandwich shop. A small rant of decadence here: these buckets are really high quality, with a thick and sturdy wall and bottom. It sickens me that they are produced only to be used once to hold (for a small amound of) food and then dumped in the garbage en masse. Seriously, the decadence!
Anyway, here is an inside view of the actual ring (covered with aluminum foil) next to an unmodified bucket:
As you can see, it contains a tube in which to insert the lens. This tube is made from a Pringles can. It’s pretty sturdy and has exactly the right diameter to fit the 18-55mm kitlens and my 55-250mm tele! The side of the ring also contains a “window” for the strobe head. The sides of the bucket and the side of the Pringles can are covered in aluminium foil to reflect as much light as possible. The bottom of the bucket is left untouched, this is where the (diffused) light will come through.
Here’s a test shot with the lid off (front of ringflash is laying down, bottom up):
You can see the lid of the bucket next to it, also covered in aluminium foil. Below you can see the effect of this lid on the distribution and intensity of the light produced by the flash. Both images were made with the same settings (and some epic shutter drag). Left image is with lid removed, right image with lid attached:
As you can see, the lid really makes a difference. Small note: my flash only has a wide angle setting. If you have a strobe that can be adjusted from wide to tele, you’d probably want to use the wide setting to get as much light as possible “around” the ring.
Now it was only a matter of mounting the ring to the flash and the camera. A bit of aluminium plating bent into a bracket did the trick.
The camera attaches to the end of this bracket, with the lens facing down in the tube of the ring flash. This puts the flashhead directly in side the window.
In hindsight: I should also have attached the bracket to the lid of the ring itself, instead of simply connecting the camera and strobe and letting the ring “rest” on the lens. It’s something I can still do later.
One last thing worth mentioning when I tried to use a screw to attach the camera to the bracket: I live in Belgium, Europe. In here we have the (sensible) metric system. I only have bolts with a metric speed, and it turns out that a camera tripod mound uses imperial-based bolts. I could, however get a metric bolt in for about three quarters of a turn. It’s not the safest thing to do (twist it to hard and you break the wire of the bolt/nut, don’t fasten it hard enough and your flash falls off). It works for now, but I should probably find some imperial bolts if I continue using this setup.
In summary, this is the complete “system” with all the pieces spread out:
I haven’t found the time to make some decent macro shots with the ring flash. And given that (judging by the weather) it’s rapidly turning into winter, I’m afraid I won’t have much time left to try and surprise some tiny critters with my ring flash.
I could, however, test the flash by using it for that other, typical, technique: to shoot a portrait (the first victim I could find was my mom):
You can clearly see the circular catchlight in her eyes, and the (diffuse) shadow that follows the contours of her head in the wall behind her.
Given the small diameter of the ring, I had to get pretty close with a short focal length or else the catchlights would have been too tiny to see (it’s a macro ring, after all). This small subject distance also adds to the diffuseness of the shadow on the background.
To conclude, I’ve enhanced my $0 strobe to a $0 ring flash. It was fun doing so, and I hope it’ll be lots of fun to hunt some bugs with it, and blind the crap out of them!
About the author: Roald Frederickx is a Belgian physics and computer science student who has a passion for photography and DIY projects. Visit his blog here.
